Angle Adapter




angle adapter plates

http://gallery.mikrokopter.de/main.php/v/tech/IMG_4612.jpg.html

With these adapter plates the motors can be tilted by 3°

They just have to be mounted between the motor and the aluminium arm.

The angle adapters increase the yawing of large MikroKopters (e.g. Okto) significantly

/!\ Notes:

  • the orientation is important (see below)
  • If the lenght of the riggers is different, you might need different angles (2° for long riggers and 3° for short)
  • please use screw locking adhensive

Difference 2° and 3°

Left rotating motors (top view)

Clockwise rotating motors, (viewed from above) must be tilted as follows:

http://gallery.mikrokopter.de/main.php/v/tech/IMG_4622.jpg.html

This is needed for:

  • Nick-Motors of a quadro (front and rear)
  • Hexa, October and bigger: all motors with an odd address (1,3,5,7)

Right rotating motors (top view)

Counter-clockwise rotating motors, (viewed from above) must be tilted as follows:

http://gallery.mikrokopter.de/main.php/v/tech/MotorAngle_Left_Rotating.jpg.html

This is needed for:

  • Roll-Motors of a quadro (left and right)
  • Hexa, October and bigger: all motors with an even address (2,4,6,8)



KategorieAnleitung KategorieEnglish