Unterschiede zwischen den Revisionen 2 und 3
Revision 2 vom 30.03.2010 05:11
Größe: 2015
Autor: smokytyrz
Kommentar:
Revision 3 vom 30.03.2010 05:12
Größe: 1956
Autor: smokytyrz
Kommentar:
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 42: Zeile 42:
http://mikrokopter.de/ucwiki/en/xbee?action=AttachFile&do=view&target=xbee.jpg attachment:xbee.jpg

siehe auch: (evtl. Links zu anderen verwandten Seiten einfügen...) TableOfContents You'll need two XBee modems. They come in 3 different antenna flavors.

XBee Pro 900 RPSMA - This is the one most folks will use. http://www.sparkfun.com/commerce/pro...oducts_id=9099

XBee Pro 900 wire http://www.sparkfun.com/commerce/pro...oducts_id=9097

XBee Pro 900 U.FL http://www.sparkfun.com/commerce/pro...oducts_id=9098

U.FL to SMA adapter http://www.sparkfun.com/commerce/pro...oducts_id=9145

You need two XBee adapters. One needs to the the USB version, because you just plug that into your computer, and fire up MK-Tool.

You can also use the USB version for the MK end, though it's more expensive, and slightly heavier than the "regulated" version which lacks the USB and FTDI stuff. You might have to jumper across a diode on the board as well, since it doesn't play nice with the diode in place.

If you're only going to buy two adapters, I'd recommend getting two of the USB versions, since you can use them to test the XBee modems on your computer. If you want more than 2 adapters, then you could get the cheaper ones.

XBee USB Adapter http://www.sparkfun.com/commerce/pro...oducts_id=8687

XBee "Regulated" Adapter http://www.sparkfun.com/commerce/pro...oducts_id=9132

The connection to the MK :

MK FC or Navi-board.....- XBee

Pin 1..........................- Pin 2 (DOUT)

Pin 2..........................- 5V connection on XBee USB adapter board

Pin 7..........................- Pin 10 (GND)

Pin 9..........................- Pin 3 (DIN)

attachment:xbee.jpg

Configure XBee for 57600 baud.

If you don't have spare ribbon cable, you can add one of these to your order:

http://www.sparkfun.com/commerce/pro...oducts_id=8535

Use the XCTU program to do any configuration you need, as well as testing the XBees.

http://www.digi.com/support/productd...=57&s=316&tp=5

/!\ ToDo: